Skil LL9322G-00 Guide D'utilisation page 12

Using With the Tripod
The tripod provides a stable, height-adjustable support (up to 43 inches).
Thread the ¼" screw on the tripod into the ¼" threaded mounting hole on the tool.
Tighten the tool with the tripod 1/4'' screw platform.
Loosen locking knob 1. Rotate the crank until the desired height is attained. Tighten locking
knob 1 to lock in the center column in position. (FIG. 4)
Fig. 4
Loosen locking knob 2. Adjust the mounting
plate to the desired position; the maximum
adjustment scale is 90°. After adjustment,
tighten locking knob 2 to lock the mounting
plate in position (FIG. 5).
12
Manually raise the column to
the height desired
Fig. 5
90
o