Skil LL9322G-00 Guide D'utilisation page 10

The LED indicator light flickers in green during charging to indicate that the charged battery
•
capacity has reached more than 90% of full capacity.
The LED indicator light steadily shines green when the battery has reached full charge
•
capacity.
Remember to remove the USB charging cable from tool when charging is complete.
During normal use, the LED indicator for battery capacity will illuminate continuously in
different colors to indicate approximately how much battery capacity remains.
When the LED indicator light illuminates green, it indicates that the battery charge is more
•
than 40% of full capacity.
When the LED indicator light illuminates yellow, it indicates that the battery charge is less
•
than 40% of full capacity.
When the LED indicator light illuminates red, it indicates that the tool can only be operated
•
for approximately 30 minutes before turning off automatically.
To Turn the Self-Leveling 360 Degree Cross Line Laser On and Off
WARNING
around you. Never point the 360 Degree Cross Line Laser at anyone's face, including
your own.
To turn the Self-Leveling 360 Degree Cross Line Laser on, push the mode switch in the
direction of the unlock icon, or press the laser button when the mode switch is in the direction
of the lock icon.
If the Self-Leveling 360 Degree Cross Line Laser is turned on with the mode switch in the
direction of unlock icon, push the mode switch in the direction of the lock icon to turn off.
If the Self-Leveling 360 Degree Cross Line Laser is turned on with the mode switch in the
direction of the lock icon, press the laser button repeatedly until it turns off.
Laser-Line Projection Modes
The Self-Leveling 360 Degree Cross Line Laser has three laser-projection modes. To select
a specific laser-projection mode, repeatedly press the laser button until you reach the desired
projection mode. This laser tool defaults to the cross-hair pattern mode when it is turned on.
To choose a projection mode, press the laser button:
Press the button once to select the horizontal laser line.
•
Press the button twice to select the vertical laser line.
•
In the Self-Leveling mode, press the button three times to return to the cross-hair pattern.
•
In manual leveling mode, press the button three times to turn the laser off. Press the laser
button again to restart with the cross-hair pattern.
10
When turning on the Self-Leveling 360 degree Cross Line Laser,
always be aware of protecting your eyes and the eyes of those