Button
Bouton
Botón
Wand Swivel
Pivot du tube
Dispositivo giratorio
del mango
Cord Holder
Attache du cordon
Sujetador del cordón
Raised Area
Portion en relief
Área elevada
Up and In
Vers le haut et à l'intérieur
H
acia arriba y hacia dentro
ASSEMBLY
Wands
➢ ➢ Slide wands together until wand
button snaps into place.
Turn wand button to slotted area of
➢ ➢
wand swivel.
Power Nozzle
➢ ➢ Insert wands into POWER NOZZLE
until the wand button snaps into
place.
➢ ➢ Connect POWER NOZZLE plug and
cord as shown.
➢ ➢ Do not force.
➢ ➢ Raised area of plug must face
toward hand.
➢ ➢ If hard to install, turn the plug over
and try again.
To Remove:
➢ Disconnect POWER NOZZLE plug
and cord.
➢ Press wand quick release pedal.
➢ Pull wands out of POWER NOZZLE.
- 14 -