Pioneer DEH-X8700BH Mode D'emploi page 9

NOTE
There is a USB port and AUX input jack (3.5 mm stereo jack) on the rear of this unit (page 21).
CD
1
Insert a disc into the disc loading slot with the label side up.
To eject a disc, stop playback first then press
USB device/iPod
1
Plug in the USB device/iPod using an appropriate cable.
NOTE
Use a Pioneer USB cable to connect the USB storage device to the unit.
Before removing the device, stop playback.
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable
supplied with the device. However, depending on the connected device and the numbers of the files in
the device, audio files/songs may not be played back via MTP. Note that MTP connection is not
compatible with WAV and FLAC file formats, and cannot be used with the MIXTRAX function and the
music browse function ([Music browse] is set to [OFF] automatically).
AUX
1
Insert the stereo mini plug into the AUX input jack.
2
Press SRC/OFF to select [AUX] as the source.
NOTE
If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 19).
Operations
You can make various adjustments in the FUNCTION settings (page 16).
Note that the following operations do not work for an AUX device. To operate an AUX
device, use the device itself.
Purpose
Select a track/song (chapter)
Fast forward or reverse
.
Operation
Turn LEVER.
Turn and hold LEVER.
Purpose
Search for a file from a list*1
View a list of the files in the selected folder/
category*1*2
Play a song in the selected folder/
category*1*2
Alphabetical search (USB/iPod only)*1
Return to root folder (USB only)*2
Switch between compressed audio and CD-
DA (CD only)
Change drives in USB device
(Devices that support the USB mass storage
device class protocol only)
*1 The music browse function is available when [Music browse] is set to [ON] in the FUNCTION settings
(USB Only) (page 17).
*2 Compressed audio files only
NOTE
When iPod is selected as a source, you can play playlists created with the computer application
(MusicSphere). The application will be available on our website. Playlists that you created with
MusicSphere are displayed in abbreviated form.
Operation
1 Press
to display the list.
2 Turn the M.C. dial to select the desired
file (folder) name or category, then press
to confirm.
3 Turn the M.C. dial to select the desired
file, then press to confirm.
Playback starts.
Press the M.C. dial when a folder/category
is selected.
Press and hold the M.C. dial when a folder/
category is selected.
1 Press
to display the list.
2 Turn the M.C. dial to select the desired
category list, then press to enter the
alphabetical search mode.
(Turning the M.C. dial twice also enters
the alphabetical search mode.)
3 Turn the M.C. dial to select a letter, then
press to display the alphabetical list.
To cancel alphabetical search, press
DISP.
Press and hold BAND/ .
Press BAND/ .
Press BAND/ .
/
9
En