Automatic Time Limitation; Basic Settings - CONSTRUCTA CA4 13 Série Mode D'emploi

Once the time has elapsed
A warning signal sounds. In the time program function
display ‹‹ is shown, and the W indicator comes on. After
10 seconds the indicators turn off.
Pressing the W symbol turns off the indicators and stops the
beep.

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display, "and ‰
flash alternately.

Basic settings

The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
Childproof lock
™‚
‹ Deactivated.*
‚ Activated.
Sound signals
™ƒ
‹ Confirmation beep and error signal deactivated.
‚ Only confirmation beep deactivated.
ƒ All signals activated.*
Automatic timer
™†
‹ Switched off.*
‚-ŠŠ Automatic shut-off time
Duration of the time program function warning signal
™‡
‚ 10 seconds*.
ƒ 30 seconds.
„ 1 minute.
Power-Management function
™ˆ
‹ = Deactivated.*
‚ = 1,000 W. minimum power.
‚ = 1,500 W.
ƒ = 2,000 W.
etc.
Š or Š. = maximum power of the hob.
Return to basic settings
™‹
‹ Personal settings.*
‚ Return to factory settings.
*Factory settings
Changing or cancelling the time
Press the S symbol several times until the S indicator lights
up. Change the time with the + or - symbols, or set to ‹‹.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
23