Connect The System Input/Output; Ethernet Connection - HBM PACEline CMD600 Manuel D'emploi

CMD600
6.2.2 Connect the system input/output (View of pins in CMD600)
1
2
8
7
3
4
5 6
The charge amplifier is supplied via this socket with an external DC voltage
source. The CMD600 does not have an On/Off switch. If the correct supply
voltage is connected, the LED lights up (see Page 12).

6.2.3 Ethernet connection

3 4
2 1
Category 5 shielded cables are used for the Ethernet connection. We
recommend the HBM Ethernet Cross Cable; Order number 1−KAB284−2
We recommend using an Ethernet Cross cable when the CMD600 is
connected directly to a PC or host.
A2781−2.1 en/de/fr
Pin No. Signal name
1 Ground supply
2 Sensorteach
3 Reset
4 TEDS
5 Charge out
6 Output ground
7 Not in use
8 Voltage supply
Pin No.
1
2
3
4
Description
−
Digital input, active High
Digital input, active High
−
Output signal
Output signal ground
Not in use
Voltage supply between Pin 8 and 1
Signal name
TX +
RX +
TX −
RX −
29
Value Color
code
KAB168...
− wh
+18 − 30 V br
+18 − 30 V gn
− ye
"10 V gy
− pk
− bu
+18 − 30 V rd