VKIA405
3
Mounting the amplifier
Mounting direction
Fig. 3.1: Mounting dimensions
The best way to fit the VKIA405 is with the grommets pointing downward. This makes
it more difficult for moisture to get in.
Top view of housing
1.
3.
Fig. 3.2: Tightening the mounting screws, sequence
CAUTION
Please tighten the lid screws with a torque of 0.7 N@m, to ensure that the
specified IP degree of protection and the highest possible EMC protection is
provided.
A2448-1.1 en/de/fr
250
260
264.1
278
Tighten the mounting screws in the following sequence:
Max. tightening torque for lid
screws: 0.7 N@m
100
110
128
* With rubber seal
(mounted condition)
4x M12, SW 14 for
2x M16, SW 17 for
cable diameter
cable diameter
4 ... 6.5 mm
5 ... 9 mm
9
4.
2.
HBM