Operation; Operation Instructions; Mounting The Trimming Unit; Mounting The Blade - Zipper Maschinen ZI-MOS145G Mode D'emploi

14

OPERATION

14.1

Operation instructions

14.1.1 Mounting the trimming unit

 Put the flange E onto the thread bolt and fix it
against twisting by inserting the screwdriver through
the two borings as shown in the picture.
 Now screw the trimmer F onto the thread, still being
fixed with the screwdriver.
The trimmer is suitable for lawn or grass
cuts.

14.1.2 Mounting the blade

 Put the distance ring E and then the mowing cutter
onto the thread bolt. Fix the assembly with the
screwdriver against twisting.

and the cover H onto the thread bolt and fix it.
Metal blades are suitable for
the cutting of weeds,
Scrub, undergrowth and tall grass.

14.1.3 Cutting head ZI-BR3

Note the operation manual
of the ZI-BR3!

14.1.4 Mounting the belt

Hang the belt into the belt hanging assembly on the pole. Strap
the belt around your hips so that the anti-vibration pad is lies onto
your right hip on the side.
The shorter belt part you strap horizontally around your shoulder.
The longer belt part diagonally. Adjust the belt lengths so that the
machine weight is distributed evenly onto the two shoulders.
Never work without using the belt.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-MOS145Gi 41
Now add the flange G
OPERATION
41