Personal Wear - Zipper Maschinen ZI-MOS145G Mode D'emploi

 Vibration:
The declared vibration emission value has been for a standardized test is measured and can
be used to compare one tool with another electric are.
The declared vibration emission value may also be used for a preliminary assessment of
exposure.
 Warning:
Emission level of vibration can be different from the specified value during the actual use of
the electric tool, depending on the manner in which the power tool is used
 Kickback
When working with metal cutting blades, it can, if fixed objects (trees, branches, stones, or
the like) are involved, come to a check of the entire unit or to an abrupt train forward.
This check occurs suddenly without warning and can lead to loss of control of the unit and
endanger the user and bystanders.
Special Threatened in poor visibility areas and dense vegetation.
So keep checking by kickback
 Hold the unit with both hands when working securely.
 Be easily spread on a secure footing and keep your feet always count on you with a
possible setback.
 Do not overestimate yourself and keep it in working balance at all times.
 The knife should have reached full operating speed before cutting begins.
 When clearing stones and debris can be thrown and cause serious
Make sure that the cover is securely mounted.
Be rotating parts (blades) mounted incorrectly, this can lead to serious accidents.
Check before starting work, the cutting blade for tight fit
12.4

Personal wear

A. Security helmet
B. Hearing protection
C. Face prodection
D. Belt
E. Safety gloves
F. Safety cover of moving unit
G. Safety shoes
H. Working trousers
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-MOS145Gi 37
SAFETY
injury.
37