switel DF 100 Série Mode D'emploi page 66

Telephoning
1
75
Internal calls
Making internal calls
There must be two or more handsets (HS1, HS2, ...) registered on your base station in
order to make internal calls free of charge.
HS1: I, e.g. 2, OK
HS2: ƒ
HS1/HS2: ‹
Forwarding external calls internally
HS1: I, e.g. 2, OK
HS2: ƒ
HS1: ‹
If the handset called does not answer, take the external call back by pressing
the I button.
Holding a call / brokering
While a call is in progress, it is possible to dial another handset in order to consult with
someone. The external caller is put on hold while you are conversing with the second, in-
ternal person called. You can repeat this procedure as often as required.
HS1: I, e.g. 2 , OK
HS2: ƒ
HS1: I
Making conference calls
An external call can be transferred to include another internal handset for a conference
call.
HS1: I, e.g. 2, OK
HS2: ƒ
HS1 Join
HS1 / HS2: ‹
1
Internal calls are only possible when at least two handsets are registered in the sy-
stem . Checking the contents of the package" on Page 60.
66
Dial the internal call number of the handset
required
Take the internal call on the other handset
End the internal call
Dial the internal call number during the
conversation with the external caller
Take the internal call on the other handset
Transfer the call
Dial the internal call number during the
conversation with the external caller
Take the internal call on the other handset
Switch between callers
Dial the internal call number during the
conversation with the external caller
Take the internal call on the other handset
Start the conference
End the conference
Setting the receiver volume
The volume can be adjusted to one of 8 settings during a call.
ç / æ
76
Handsfree
This function is used to listen to the caller via the loudspeaker.
ƒ
ƒ
Displaying the duration of a call
The duration of a call is displayed in minutes and seconds during the call.
Muting the microphone in the handset
The microphone in the handset can be activated and deactivated during a telephone con-
versation.
Secrecy
Off
78
Key lock
The key lock feature prevents functions assigned to buttons being activated accidentally.
3 sec. #
Unlock
, #
Incoming calls can still be taken in the normal way even when the key lock
function is activated.
Searching for the handset (Paging)
If you have mislaid your handset, you can sound a paging tone to find it.
˜ {«}
˜ or ©
Switching the handset off and on
You can switch the handset off to save the batteries.
3 sec. ‹
3 sec. ‹
Select the required volume
Activate the handsfree facility
Deactivate the handsfree facility
77
Deactivate the microphone (muting function)
Activate the microphone
Activate the key lock function
Deactivate the key lock function
Start the search tone
End the search tone
Switch the handset off
Switch the handset on