Installation And Basic Operation; What Instrument Do I Have - ero electronic ELK Manuel Utilisateur

1.

Installation and Basic Operation

1.1. What Instrument Do I Have?

The controller may have been ordered to a hardware
code only or pre-configured using an optional 'Quick
code'.
The label, fitted to the side of the sleeve, shows the
ordering code that the controller was supplied to.
For special features not covered in this User Guide, a detailed Engineering Manual, Part No HA029065, and other
related handbooks can be downloaded from www.eroelectronic.com
4
The last two sets of five digits show the Quick Code.
If the Quick Code shows *****/***** the controller
was supplied with default parameters and it will need
to be configured when it is first switched on. This is
described in section 3 of this User Guide.
Part number HA028438. Issue 3.0.
Label showing
ordering code
and serial
number
Oct-05