Delayed Timer - ero electronic ELK Manuel Utilisateur

4.4.2.

Delayed Timer

'TI.CFG' = 'DELY'. The timer is used to switch
on the output power after a set time. The timer starts
immediately on power-up, or when run. The
controller remains in standby with heating and
Scrolling Message
RESET Digital input
RUN
END
Part number HA028438. Issue 3.0.
Temperature
Setpoint
TIMER RUNNING
Run
Oct-05
cooling off, until the time has elapsed. After the
time has elapsed, the instrument controls at the
target setpoint.
TIMER END
Reset
Time
43