Télécharger Imprimer la page

Skytec 160.570 Mode D'emploi page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Use
-
Place the unit on a flat, stable surface which must not be tilted more than 10° Unplug the
unit from the mains prior to filling the can carefully with a good quality bubble fluid
(SkyTronic 160.575).
-
Install the can as per the figure below (fig. 1). Place the can upside down in the bubble
machine. This way the fluid is fed into the unit automatically.
-
Plug the unit into a wall outlet.
Afdekdop
Tapse veer
Stop
Water tank
FIG. 1
-
Press the upper button at the rear side of the machine. The first wheel will start rotating.
-
Press the second button and the second wheel will start rotating so that the machine will
produce much more bubbles. Press again button 2 and the second wheel will stop. Thus
you can set the quantity of bubbles (please note! The second wheel only rotates if the
first one does!)
-
The two push buttons on the remote control have the same function.
Maintenance
-
Unplug the unit from the mains prior to cleaning it
-
Clean only with a damp and/or dry cloth. Never use alcohol or other chemical cleaners.
-
Switch the unit off after use and unplug it from the mains if it will not be used for a long
period of time.
-
Rinse the unit regularly with clean water.
Specifications
Power supply: ..................................................................... 230 VAC / 50 Hz
Power rating: ..........................................................................................80 W
Can capacity:............................................................................................. 3 L
Rotation speed: .................................................................................. 24 rpm
Dimensions: ...................................................................416 x 338 x 260 mm
Weight: ................................................................................................ 7.5 kg
Specifications and design subject to changes without prior notice
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual.
SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and
warnings. This is also applicable to all damages in whatever form.
Drukknop 1
Drukknop 2
FIG. 2

Publicité

loading