HQ Power VDP250MHW16 Mode D'emploi page 5

CHANNEL 13
CHANNEL 14
CHANNEL 15
CHANNEL 16
c. DMX-512 Connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDP250MHW16. Multiple VDP250MHW16s can be linked through serial linking. The linking
cable should be two core, screened cable with XLR input and output connectors.
Caution: At the last fixture, the DMX cable has to be terminated with a terminator.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with the
fixture or one fixture with another.
Occupation of the XLR-connector:
VDP250MHW16
EFFECT WHEEL FILTER
KEEP
SHUTTER, STROBE
DIMMER
80 87
88 95
96 103
104 111
112 119
120 127
128 135
136 143
144 151
152 159
160 167
168 175
176 183
184 191
192 199
200 207
208 215
216 223
224 231
232 239
240 247
248 255
0 70
71 180
181 255
0 255
0 31
32 63
64 95
96 127
128 159 Pulse effect in sequence from slow to fast
160 191
192 223 Random strobe from slow to fast
224 255
0 100
5
Colour 10
Colour 11
Colour 12
Colour 13
Colour 14
Colour 15
Colour 16
Colour 17
Colour 18
Colour 19
Colour 20
Colour 21
Colour 22
Colour 23
Colour 24
Colour 25
Colour 26
Colour 27
Colour 28
Colour 29
Colour 30
Colour 31
Full beam
Frost filter
Beam shaper
-
Shutter closed
Shutter open
Strobe effect from slow to fast
Shutter open
Shutter open
Shutter open
Black / Brightness
VELLEMAN