Pioneer SP-SB03 Mode D'emploi page 8

8
English
HOW TO CONNECT YOUR SPEAKER BASE TO YOUR TV
The simplest approach is to connect the optical audio output of your TV to the optical input on the back
of the Speaker Base. This method will provide the highest quality audio. If your TV does not have an
optical output, you can use the optical output from your DVD player or your cable/satellite box to
connect to the optical input on the base, or use an analog cable (not supplied) to connect the Speaker
Base to your TV.
CONCERNING THE PLACEMENT OF THIS SYSTEM
CAUTION:
When setting up the Speaker Base, lay all audio/video components down flat to avoid accidents or injury.
Make sure to assemble and set up the system atop a sturdy base that's strong enough to hold the Speaker
Base, the TV, and any other components in the system. Please ensure that your TV stand completely fits on
top of the Speaker Base with at least 1" of clearance surrounding the stand.
WHERE TO LOCATE YOUR SPEAKER BASE
Correct placement is important for maximizing the sound quality of your Speaker Base. The Speaker Base
should be positioned under the TV, with the TV placed directly atop the Speaker Base. Make sure the stand or
table you place the Speaker Base and TV on is sturdy enough to hold both components. Do not place objects
between the Speaker Base and the table or stand underneath—they could interfere with the Speaker Base's
downward-firing woofers.
CABINET MAINTENANCE
Great care and craftsmanship has gone into the construction and finish of the Speaker Base's cabinet.
Periodically use a soft, dry cloth to remove dust or fingerprints. Do not use paper towels or other abrasive
materials as they may damage the finish.
NOTE: Please retain the carton and packing material for your Pioneer products, to protect them in the event of
a move or if they need to be shipped to a service center. Product that has been shipped by the end user in
other than the original packaging and is received by the service center in damaged condition will be repaired,
refurbished and properly packaged for return shipment, at the end user's expense.