Adjusting The Cutting Height - LawnMaster LMRM1601 Guide D'utilisation

ASSEMBLY
WARNING
Always keep hands clear of blades when attaching the handle to the frame. Not doing so can
result in serious injury!

ADJUSTING THE CUTTING HEIGHT

The cutting height can be adjusted between approximately 1.2" (31mm) and 2.4" (61mm).
■ Move the right-hand height adjustment lever outward and then position it forward (to lower the
cutting height) or backward (to raise the cutting height) before releasing it into the notch to set
the desired cutting height (Fig. 4).
■ Repeat step 1 on the left-hand side making sure to release the height adjustment lever into the
corresponding notch.
NOTE: Never mow your lawn at the mower's lowest setting as this can cause lawn to turn brown or die.
Fig. 4
11