Handle Assembly - LawnMaster LMRM1601 Guide D'utilisation

ASSEMBLY
WARNING
If any parts are damaged or missing do not operate this product until the parts are replaced. Failure
to heed this warning so could result in serious personal injury.
WARNING
Do not attempt to modify this product or create accessories not recommended for use with this product.
Any such alteration or modification is misuse and could result in a hazardous condition leading to
possible serious personal injury.
WARNING
Never operate the mower without the proper working safety devices in place. Never operate the
mower with damaged safety devices. Failure to heed this warning can result in serious personal injury.

HANDLE ASSEMBLY

■ Secure the upper handle to the middle handles with two carriage bolts and two twist knobs (Fig. 1).
■ Secure the handle assembled in step 1 to the lower handle with four carriage bolts and four twist
knobs (Fig. 2).
■ Place one of the round openings, at the bottom of the handle, over one of the steel studs on the
mower frame paying particular attention to handle position. Then slowly apply lateral pressure to
the other lower handle until it can be slid into and over the second steel stud, while keeping hands
free of blades (Fig. 3).
Fig. 1
Fig. 2
10
1
2
Fig. 3