Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
NAIL SELECTION
Only nails shown in the Table below can be driven with this Nailer.
NOTE: Use only genuine Hitachi nails to assure nail quality and driving ease.
Wire-collated coil nails
MIN.
MAX.
.236"
.283"
(6mm)
(7.2mm)
.099"
(2.5mm)
.131"
(3.3mm)
Nails are collated and coiled, as shown in the above figue.
ACCESSORIES
Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
Sheet-collated coil nails
MIN.
.224"
(5.7mm)
.090"
(2.3mm)
Dimensions of nails
WARNING
1
1 Eye protector
2 Nose cap "No-mar push lever
attachment" (It is attached in the
magazine assembly)
— 9 —
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
10-11/16" × 13-5/16" × 5-3/16"
(271 mm × 338 mm × 132 mm)
5.5 lbs (2.5 kg)
200 – 300 nails (1 coil)
3
.064 ft
/cycle at 100 psi
(1.8 ltr/cycle at 6.9 bar)
(1.8 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
MAX.
.236"
(6mm)
.099"
(2.5mm)
2
1
1
English
2
)
2
)
Publicité
Table des Matières
