Connecting The Aerial Signal To The Megavideo55 Modulator - Marmitek MEGAVIDEO55 Mode D'emploi

used for other applications. When the MegaVideo55 is connected to the scart doubler
(using the RCA cables on the side) and the scart cable that was originally connected to your
appliance at the same time, jumper E will have to be removed. The MegaVideo55 ensures
that picture quality is maintained.
Connecting a number of appliances
If you want to simultaneously connect several appliances to the modulator there are a
number of ways to do this:
Using a suitable A/V switcher
All of your appliances are connected to the A/V switcher. This option gives the best quality.
A good A/V switcher (such as the Marmitek Flat TV Link 4, art. no. 09592) takes care of
the correct modification of the signal.
Using a trio RCA splitter
(1x RCA to 2x RCA adaptors). In this case jumper E should be removed. The MegaVideo55
optimises picture quality.
4. CONNECTING THE AERIAL SIGNAL TO THE
MEGAVIDEO55 MODULATOR
Two types of aerial plug are used in Europe: the IEC plug and the F plug. The latter has the
least loss and is therefore often used in better quality systems. Your Marmitek MegaVideo55
uses this type of plug. Check your situation below:
MEGAVIDEO 55
TM
INFRARED
RECEIVER
INFRARED
RECEIVER
AERIAL
IR LED
5