Hapro Luxura Mode D'emploi page 17

Choose coin-op or stand alone
The appliance comes set up for use with an external timer or coin-op. To change
this, the following procedure applies.
Press the following keys successively:
<STOP> <STOP> <PLUS> <STOP> <MIN>
The main parameter "P1" will appear at the top of the display, and the name of the
main parameter "UNIT" will scroll across the bottom.
Press <START> 1x.
The parameter "1" will appear at the top of the display, and the name of the
parameter "START TIME" will scroll across the bottom.
Press <START> 1x.
The number "1" appears at the top of the display and the current parameter
number appears at the bottom. This number is the maximum tanning time (in
minutes) per session.
Use the <MIN> and <PLUS> keys to adjust the number accordingly.
Choose a number between "1" and "30" for stand alone use.
Choose "0" to use the sunbed with a coin-op.
Press <START> to save the chosen number.
ENGLISH
17