brennenstuhl professionalLine X 4000 MA Mode D'emploi page 9

037220 X 4000 MA.qxp_037220 BA_X 4000 MA 24.09.20 09:17 Seite 9
Tripod mounting material
A set of screws is included for mounting the spotlight on firing chair stands.
1x M6x45 screw + 1x washer, 2x M6x60 screws, 2x washers and 2x nuts.
Mounting the light on a tripod
The light can be mounted on a suitable tripod using the holes on bracket
Make sure the tripod is sufficiently stable and the light is securely mounted.
Switching and Dimming the light
Switch on the spotlight with the switch
The light intensity can be adjusted in steps and continuously:
Steps dimming: by pressing the switch twice, 100 and 50% light can be adjusted.
Stepless dimming: press the switch permanently – the light intensity is slowly reduced.
Proceed in the same way to increase the intensity again.
If the switch is left in any of its "on" positions for longer than 3 seconds, then pressing it once again will always
turn it off.
ILLUSTRATED COMPONENTS
CHARGING EXTERNAL DEVICES VIA USB
The floodlight can serve as a USB power-bank. An external device like a smartphone or tablet can be connected
B
to the USB port and charged. The number of possible charge cycles depends on the type of external device
and on the charge level of the floodlight's battery.
During the charging process, the product is not IP55-compliant (dust-protected and protected against splashing
water).
B
on the back.
D
C
B
E
A
www.professionalline.com
A
(mounting material not included!).
A Folding clamp
B On/Off and function switch
C USB output (power bank)
D Battery-, status and charge indicator
E DC charging socket
F Charger
F
180°
9