Testing The Remote Control - Geberit AQUACLEAN Mera Classic Instructions De Montage

EN
After a complete shower cycle, the device
will require around 2 minutes to bring the
storage water heater back to shower water
temperature. During this time, hot water will
only be available from the rear spray nozzle.
2
Test shower water temperature.
✓ The shower water is noticeably heated
over the entire shower cycle.
3
Test adjustability of spray intensity.
✓ During a shower cycle, the spray
intensity can be altered.
50
4
Test the Lady shower function.
✓ Lady shower nozzle extends.
✓ The Lady shower function starts.
✓ All nozzle openings are active.

Testing the remote control

For the following test steps, weight must be
applied to the WC seat to simulate a user.
The LED on the lateral control panel lights
up blue during this.
9007203612975499-1 © 11-2018
968.543.00.0 (00)