Brandy Best BCGEC60 Notice D'emploi page 31

7 mm
10 mm
4- Once the brackets are mount, move the product towards them (Image B)
5- Please ensure that the two rear legs of the product are inserted into the safety device as shown in
(Image C)
his equipment is supplied with the plug
Before making the connection, make sure that the power of your electrical installation is sufficiently
dimensioned to operate your equipment safely.
In case of doubt, ask your installer, the electrical connection must be performed in accordance with
standards EN60335.
The section of supply cables is very important and must be sufficient to avoid overheating and create a fire
hazard in your home.
WARNING: This device must be connected to ground via a proper outlet.
This plug must be connected to a connector complying with the standards in force at the time of installation.
WARNING : In all cases, the power cable must be positioned so that it is not in direct contact with
the hot zone. At no time the temperature close to the cable must be greater than 50 ° C.
WARNING : Place your device close enough to the power so that the connecting cable is not
distended. Do not use extension cables.
476 mm
7 mm
10 mm
Page 9