Bracket Device Installation - Brandy Best BCGEC60 Notice D'emploi

CAUTION: Avoid installing the oven close to combustible materials (e.g. curtains, towels, etc.)
Completely unwind power cord and gas supply pipe as the diagram below and connect the plug.
The appliance should be positioned so that the plug is always accessible.
Do not pass electrical cables behind or near hot parts of the appliance and through the holes or covered
parts that could cut or damage the cables.
Make sure oven racks are properly inserted.

Bracket device installation

Installation instructions
1- The tools necessary for the installation is medium cross screw driver an a drill machine.
2- Place the holding devices on the fl oor to the corresponding measurements (imageA).
3- Fix them to the fl oor using screws and plugs.
For your safety, your free standing cooker have to be installed with a ground
support mechanical device to avoid a tilting of the product to the front.
You can fi nd it in the accessories pocket include with your product.
See the description picture at the left side
1- Screws
2- Plugs
3- Washers
4- Bracket device
Page 8