Security Elements - Merand AQUAPAN 100 Manuel D'instructions

20.

SECURITY ELEMENTS

The machine has fixed lids that protect the moving elements, transmissions, belts, engines,
dashboard, and other elements that could have a risk and that its manipulation is not necessary for the
daily use of the machine.
These lids are fixed by screws, being necessary a special key for taking them off. This operation can
only be made by qualificate personal for the operations of maintenance and reparation, always when
the machine is stopped and unplugged.
Anyway is forbidden to put the machine on its start without the lids fixed with their screws.
It has as well a deposit slip at the entrance and at the exit of the lamination and the blade rollers for
helping the feed operations of the machine and cleaning.
These deposit slips have some electro micros that don't let the machine start if they are opened, and
they cause the stop in the case that it opens while the machine is on. In these cases it appears in the
display of the programming console the following messages:
IMPORTANT: to set off the machine again after an emergency stop its necessary to close the open
micro electrics and press the restart switch to deactivate the alarm.
IMPORTANT: Watch that there are not any other objects: cloths, brushes, tools[ on top of the bands
before starting them up. The machine has two emergency stops situated at both sides of the machine,
that they effect, the total stop of the machine, to start the machine again to have to press the start
switch.
Page 44