Anyway, there are some operations that next to the good cleaning of the machine will help to a longer
life of the machine.
In the lamination:
Greasy manually the chain of transmition, use lithic grease.
Greasy manually the graduation columns.
Weekly check the tension and centring of the lone.
On the table of work:
Check weekly the tension and centring of the lone.
Purge weekly the filter deposit of the air, or even more often if it was half full of water. For purging take
off the tap A (figure 16).
.
A
figure 16
All the operations detailed, will have to be done in a less periodicity if the conditions of service of the
machine are needed
Page 43