Rear Panel - Ibiza sound MX802 Manuel D'utilisation

and AUX2 buses. These jacks are typically used to receive a return signal from an external effect unit
(reverb, delay, etc.).
Please note: These jacks can also be used as an auxiliary stereo input. If you connect to the L (MONO) jack
only, the mixer will recognize the signal as monaural and will propagate the identical signal from both L
and R jacks.
⑦ Music Player
Insert a USB stick into the USB socket (7) to activate the music player. The unit supports MP3, WMA files.
The player offers a Bluetooth and recording function. Select the mode via the MODE button.
⑧ BLUETOOTH
Press the MP3 MODE switch to select Bluetooth mode.
⑨ POWER indicator
This indicator lights when the mixer's power is ON.
⑩ Level Meter
This LED meter displays the level of the signal output from the MAIN and the PHONES. When the LED is
OFF, it show MAIN level, when the LED is ON, it shows PHONES level.
⑪ USB control
Adjusts the signal level to MAIN bus.
⑫ AUX Control
Adjusts the output volume of the signal from the AUX socket (3)
⑬ PHONES Control
Adjusts the output level of PHONES jack (2).
⑭ Delay Control
Adjusts the delay time of the internal effect unit.
⑮ REPEAT Control
Adjusts the depth of the internal digital effects.
⑯ RETURN control
Adjusts the signal level from the RETURN socket to the MAIN bus.
⑰ MAIN GRAPHIC EQUALIZER
This 7-band EQ adjusts the sound signal sent to the MAIN OUT jack. The EQ cuts or boosts all frequency
bands (125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz) within the range of ±12dB.
⑱ MIX L / R
Adjusts the output level of MAIN socket.
⑲ EFFECT Fader Control
Adjusts the signal level of internal effects to the MAIN bus.

REAR PANEL:

① POWER
17V AC power input: Properly insert the power adaptor (supplied).
② Power switch
5