Repeat Function; Random Playback; Connecting A Microphone - Medion LIFE E61400 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30

10.8. Repeat function

 Press the P-MODE button until
you are currently playing.
 Press the P-MODE button several times until
continuously repeat all tracks on the USB memory device.
In case of USB memory devices where the files are stored in several
folders, you also have the option to continuously repeat all tracks in the
currently selected folder.
 To do so, press the P-MODE button several times until
the display.
 To deactivate the repeat function, press the P-MODE button until all above-
mentioned indicators disappear from the display.

10.9. Random playback

 Press the P-MODE button several times until RAND lights up on the display to
activate random playback.
 Press the P-MODE button again to deactivate random playback.
RAND disappears from the display.

11. Connecting a microphone

You can connect up to two microphones to the sound system at the same time. One
microphone is included with the device.
Microphones can be used in all operating modes.
To connect a microphone, proceed as follows:
 Switch off the sound system.
 Connect the microphone to microphone input MIC 1 or MIC 2.
 Switch on the sound system.
 Set the On/Off switch on the microphone to the ON position.
 Use the
MIC VOL. controller to set
 Press the ECHO button to activate the echo sound effect for the connected
microphones.
 Press the ECHO button again to deactivate the echo sound effect for the
connected microphones.
 After use, set the On/Off switch on the microphone to the OFF position.
lights up on the display to repeat the track
lights up on the display to
the microphone volume you require.
FOLDER is shown on
105
DE
FR
NL
EN
IT
ES

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Md 44400

Table des Matières