Door Removal, Leveling And Alignment - Whirlpool P8WB2L Instructions D'installation

Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.
IMPORTANT: The graphics on this page are for models with the ice storage bin on the door. On models with the ice storage bin inside
the freezer, the wiring and water dispenser tubing configurations are simpler than what is shown in these graphics. Please read all
instructions on the next few pages for more information.
NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the
refrigerator and freezer doors. If door removal is necessary, see the instructions below.
IMPORTANT: Before you begin, turn the refrigerator control OFF or turn cooling off. Unplug refrigerator or disconnect power. Remove
food, the ice storage bin (on some models), and any adjustable door or utility bins from doors.
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
Wiring Connection
3
A B C D E
A. P-clamp D. Wiring Clip
B. Routing E. Grommets
Plate F. Wiring
C. Electrical Plugs
Housing
Water Dispenser
2A
Tubing Connection
(Style 1)
A
A
A. Face of Fitting
2B
Water Dispenser Tubing
Connection (Style 2)
4

Door Removal, Leveling and Alignment

4 Top Left Hinge
AA
A. Do Not Remove Screws.
F
WARNING
Electrical Shock Hazard
Door Removal
5
AA
Base Grille
1
Doors must be
open to 90°
Top Right Hinge
6
A
A
A. Do Not Remove Screws.
7 Bottom Hinges
(Left and Right)
Leveling
8
A
B
Raise
Lower
C
A. Bottom Hinge
B. Leveler Bracket
C. Leveling Foot
Door Alignment
9
(Bottom Right Hinge)
Raise
A
Lower
A. Alignment Screw