Trouble Shooting - Zipper Maschinen ZI-BRM52EST Manuel D'utilisation

16

TROUBLE SHOOTING

Trouble
Engine does not start
Engine does not start at E-start
Engine starts and is stalled
immediately
Machine works with
interruptions
Smoke
Machine does not work with
full performance
Rough running, vibrations
Low quality cut
Poor pickup of the grass
Should you in necessary repairs not able to properly to perform or you have not
the prescribed training for it always attract a workshop to fix the problem.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-BRM52EST
Possible cause
 Incorrect starting sequence
 Dirty air filter
 No fuel supply
 Fault in the fuel line
 Engine flooded.
 Spark plug connector not placed
on.
 No ignition spark
 No/low battery
 Incorrect idle adjustment
 Carburetor incorrectly adjusted
 Spark plug fouled
 Incorrect fuel
 Carburetor incorrectly adjusted
 Machine overloaded
 Dirty air filter
 Carburetor incorrectly adjusted
 Loose blade screw
 Damaged or unbalanced blade
 Foreign material/grass wrapped,
around the blade
 To high grass
 Wrong cutting height
 Blade worn
 Full grass box
NOTICE
TROUBLE SHOOTING
Solution
 Observe the correct starting
sequence
 Clean/replace air filter
 Refuel
 Check the fuel line for kinks or
damages
 Screw off, clean and dry the
spark plug. Then pull the
cranking rope several times and
reinstall the spark plug
 Place on the spark plug
connector
 Clean/replace spark plug
 Check ignition cable
 Insert/charge battery
 Contact customer service
 Contact customer service
 Clean/replace spark plug
 Check spark plug connector
 Use correct fuel
 Contact customer service
 Grass too tough
 Clean/replace air filter
 Contact customer service
 Tighten blade screw
 Balance or replace blade
 Remove Foreign material/grass
 Set to correct cutting height
 Set to correct cutting height
 Replace blade
 Empty grass box
36