Maintenance Plan; Air Filter; Spark Plug; Carburetor - Zipper Maschinen ZI-BRM52EST Manuel D'utilisation

15.2 Maintenance plan

Loose or lost screws, nuts, bolts
Damage of any part of the machine
Damage of cutting tools
Fuel tank of tightness
Machine cleaning
Cleaning air filter
Servicing period
Engine oil Inspection
(15W40)
Change

Air filter

Inspection
Change

Spark plug

Inspection
Change
Provide appropriate servicing upon the earlier of the following: in the given month or after the
specified hours of operation (HOO) have expired.
15.2.1 Air filter
Dirty air filters reduce the engine efficiency!
 Remove air filter cover
 Remove air filter
 Clean air filter
 Replace air filter
 Replace air filter cover
15.2.2 Spark plug
 Remove spark plug cap.
 Loosen the spark plug carefully and remove it.
 Clean the plug with a wire brush
 Using a feeler gauge, set the gap to 0,75mm
 Refit the spark plug taking care not to overtighten

15.2.3 Carburetor

Carburetor adjustments should be carried out only by trained specialist personnel!
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-BRM52EST
Controls for the maintenance of the machine
Before After:
any 1 month
using 5 HOO
X
X
X
NOTICE
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly after operation
Every 20-30 working hours
After: After:
3 month 6 month
25 HOO 50 HOO
X
X
MAINTENANCE
After: After:
12 month 25 month
100 HOO 250 HOO
X
X
34