Safety First; Preparation Before Use - Rexel REM 820 Manuel D'utilisation

Specifications
Cutting Type
Shred Size
Security Class
Sheet Capacity (one pass)
Entry Width
Product Dimensions
Rated Voltage/Frequency
Rated Current

Safety First

• Ensure the machine is plugged into an easily accessible power outlet.
• Please store this instruction manual in a safe place for future
reference.
• Please pay close attention to the safety symbols on the top of the
shredder and operate the machine accordingly.
• If the shredder needs cleaning, unplug the unit from the power socket
and use a damp cloth. Do not use any cleaning products to clean the
unit.
• Do not position the unit near an object that radiates heat.
• Do not place the unit in a damp environment.
• Take care not to splash any liquid onto the machine.
• Return the product and proof of purchase with receipt to the store at
which it was purchased if...
- The power cable or plug is broken.
- The shredder doesn't operate despite following the guidelines in the
manual.
• Make sure the power cable isn't a trip hazard.
• Please ensure the power supply is compatible with the requirements
of the machine (220-240Vac 50-60Hz).
• To avoid risk of injury, do not open the machine's casing to attempt DIY
repair. Any attempted repair by an unqualified person will invalidate
the warranty.
m
DO NOT attempt to repair shredder yourself.
KEEP OUT OF REACH OF CHILDREN.
• Do not shred continuously for more than 10 minutes. When the
motor has overheated, the thermal safety switch will start working
automatically. If the thermal switch trips, do not use the machine for
about 30 minutes while the thermal sensitive safety switch cools down
so the shredder can be safely used again.
• This machine is not a toy. Keep away from children and pets.
• For indoor use only.
• Never insert fingers into the entry slot of the shredder.
• Turn the power off immediately if your hair, tie or sleeve becomes
entangled in the shredder.
• Empty the shredder bin when it is full otherwise the shredder's
performance will be adversely affected. Operating the shredder with a
full shredder bin can result in paper jamming in the cutters, which will
increase the machine's noise level.
• Do not force down shredder paper in the bin using your feet.
4
REM 820
Micro-Cut
2 x 15mm
P-5
8 sheets
220mm
565 x 351 x 260mm
220-240Vac 50/60Hz
1.3A
m
Introduction
Thank you for choosing this shredder from Rexel. We
are sure it will serve you well, but please take a little
time to read these instructions to ensure you get the
best out of your machine.
Shredder Control Panel
Off
Reverse
This means keep children away from shredder.
This means don't reach into the feed opening of the cutting
head. This could hurt you.
This means be careful of ties and other loose clothing which
could become entangled in the cutting head.
This means be careful of loose jewelry which could become
entangeld in the cutting head.
This means you should be careful because long hair can
become entangled in the cutting head. This could hurt you.
This means do not use aerosol sprays anywhere near the unit.
This means the shredder can accept small paperclips.
This means do not shred CDs in main paper feed slot.
This means there is a paper jam (see Forward and Reverse
section.
This means the shredder needs to cool down before the
shredder can be used again.

Preparation before use

How to use the shredder correctly:
1 Take care not to insert fingers, ties or other objects into the entry
slot of the shredder.
2 Try to avoid laminating materials, plastic bags etc. from being
passed through the shredder. This will prevent damage to the
cutters.
Do not shred wet paper as it can tangle in the cutters.
3
Do not shred more than the stated sheet capacity in one pass.
4
5 Do not use the "REV" ( ) (reverse) function if it's not necessary.
Over use of the "REV" ( ) function can result in shredded paper
becoming jammed in the entry slot, which will adversely affect the
performance of the shredder.
On
Forward