Important Safety Instructions - Rexel Easyfeed CC175 Manuel D'utilisation

Specifications
Models
Cutting Style
Throat Width
Shred Width
Sheet Capacity*
Speed
Amperage
Noise Level
Duty Cycle
Volts / Hz
Safety Lock
Staples / PaperClips
Credit Cards
* Meassured using standard 80g/m paper. Shredding other than standard paper may damage or shorten the lifetime of the shredder knives.
2

Important safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO
ACCO Brands. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE
IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES CAREFULLY.
m
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS INSTRUCTION MANUAL AND ON
THE PRODUCT. THIS SYMBOL INDICATES A POTENTIAL
PERSONAL SAFETY HAZARD THAT COULD HURT YOU OR
OTHERS, AS WELL AS CAUSE PRODUCT OR PROPERTY
DAMAGE. DO NOT CONNECT THIS UNIT TO ELECTRICAL
POWER OR ATTEMPT TO OPERATE IT BEFORE YOU HAVE
READ THESE OPERATING INSTRUCTIONS. SAVE THESE
INSTRUCTIONS FOR LATER USE.
THIS WARNING IS FOUND ON THE PRODUCT.
c
m
WARNING
Electrical shock hazard.
Do not open. No user
servicable parts inside.
Refer servicing to qualified
service personnel.
This safety message means that you could be seriously hurt or killed if
you open the Product and expose yourself to hazardous voltage.
THIS WARNING IS FOUND ON THE CROSS-CUT VERSION ONLY.
m
Sharp blades above.
Keep hands away from
discharge chute. Do not
attempt to defeat safety
interlock switch.
This safety message means that you could be seriously hurt if you place
your hands in the discharge area.
4
SC170 CC175
Straight-Cut Cross-Cut
220mm
220mm
6mm 4 x 40mm
12
8
2mpm 2mpm
1.0A 1.2A
68dB 68dB
2 min on/30 min off 3 min on/30 min off
230-240V/50Hz 230-240V/50Hz
Yes Yes
Yes Yes
Yes Yes
m
WARNING
1 Control Panel
2 Safety Lock
3 Switch REVERSE/FORWARD/AUTO
4 Waste Bin
5 Window. Indicates when basket is full
6 Easy lift handle
7 Switch ON/OFF
Electrical safeguards
• Unplug your shredder before moving it, emptying the shred bag, or
when it is not in use for an extended period of time.
• Do not operate with a damaged power supply cord or plug, after it
malfunctions, or after it has been damaged in any manner.
• Do not overload electrical outlets beyond capacity as this can result in
fire or electrical shock.
• The socket-outlet should be installed near the equipment and shall be
easily accessible.
• Do not alter the attachment plug. The plug is configured for the
appropriate electrical supply.
• Do not use near water.
• Keep out of reach of children.
• Do NOT use aerosol dusters or cleaners.
• Do NOT spray anything into the shredder.
m
WARNING
Do NOT use aerosol dusters or cleaners
Do NOT spray anything into the shredder
Foreign substances can be explosive
m