Safety First - Rexel ProStyle+ 7 Manuel D'utilisation

Specifications
Cutting Type
Shred Size
Security Class
Sheet Capacity (one pass)
Entry Width
Product Dimensions
Rated Voltage/Frequency
Rated Current
Introduction
Thank you for choosing this shredder from Rexel. We
are sure it will serve you well, but please take a little
time to read these instructions to ensure you get the
best out of your machine.

Safety First

• Ensure the machine is plugged into an easily accessible power outlet.
• Please store this instruction manual in a safe place for future
reference.
• Please pay close attention to the safety symbols on the top of the
shredder and operate the machine accordingly.
• If the shredder needs cleaning, unplug the unit from the power socket
and use a damp cloth. Do not use any cleaning products to clean the
unit.
• Do not position the unit near an object that radiates heat.
• Do not place the unit in a damp environment.
• Take care not to splash any liquid onto the machine.
• Return the product and proof of purchase with receipt to the store at
which it was purchased if...
- The power cable or plug is broken.
- The shredder doesn't operate despite following the guidelines in the
manual.
• Make sure the power cable isn't a trip hazard.
• Please ensure the power supply is compatible with the requirements
of the machine (220-240V 50Hz).
• To avoid risk of injury, do not open the machine's casing to attempt DIY
repair. Any attempted repair by an unqualified person will invalidate
the warranty.
m
DO NOT attempt to repair shredder yourself.
KEEP OUT OF REACH OF CHILDREN.
4
Rexel ProStyle+ SC Rexel ProStyle+ 5
Strip Cross Cut
6.5mm 4 x 40mm
P-2 P-4
7 5
225mm 225mm
354 x 179 x 277mm 354 x 179 x 277mm
220-240V / 50-60Hz 220-240V / 50-60Hz
0.8 Amps 0.8 Amps
Shredder Control Panel
• Do not shred continuously for more than 2 minutes. When the
• This machine is not a toy. Keep away from children and pets.
• For indoor use only.
• Never insert fingers into the entry slot of the shredder.
• Turn the power off immediately if your hair, tie or sleeve becomes
• Empty the shredder bin when it is full otherwise the shredder's
• Do not force down shredder paper in the bin using your feet.
Rexel ProStyle+ 7
Cross Cut
4 x 25mm
P-4
7
225mm
355 x 204 x 351mm
220-240V / 50-60Hz
1.3 Amps
Off
Reverse
motor has overheated, the thermal safety switch will start working
automatically. If the thermal switch trips, do not use the machine for
about 30 minutes while the thermal sensitive safety switch cools down
so the shredder can be safely used again.
entangled in the shredder.
performance will be adversely affected. Operating the shredder with a
full shredder bin can result in paper jamming in the cutters, which will
increase the machine's noise level.
This means keep children away from shredder.
This means don't reach into the feed opening of the cutting
head. This could hurt you.
This means be careful of ties and other loose clothing which
could become entangled in the cutting head.
This means be careful of loose jewelry which could become
entangeld in the cutting head.
This means you should be careful because long hair can
become entangled in the cutting head. This could hurt you.
This means do not use aerosol sprays anywhere near the unit.
This means the shredder can accept small paperclips
(ProStyle+ SC).
On
Forward
m