Preparation For; Installation; Unpack The Device - Berbel BKF Manuel D'utilisation Et De Montage

Installation

3.2.1 Preparation for installation
The device is designed for installation in
kitchen units. The installation sequence
may vary, depending on the local
conditions.
☞ Familiarise yourself with the
installation situation and the
associated documents.
y Device and instructions.
y Accessories.
y Installation location.
y Order documents.
y Dimensions, position and
alignment of the components.
☞ Assemble the tools and materials
required:
y Protective material (e.g. thick
cardboard) for the hob and the
worktops.
☞ Keep the installation area free of
objects that could be in the way or
that could be damaged.
☞ Make sure that the hob and other
parts that could be touched have
cooled down.
☞ Protect the hob and other surfaces
in the installation area (e.g. with thick
cardboard).
☞ Ensure that the power supply is
switched off and remains so. Connect
the power supply only when
instructed to do so in the installation
instructions.
6005969_0 – 29.09.2021
3.2.2

Unpack the device

D ATTENTION!
Hazard of glass breaking or other
damage due to incorrect handling!
The device and its surfaces can be
damaged when being unpacked or
transported.
☞ Do not cut into the protective
cardboard packaging.
☞ Keep objects that could scratch the
device far away from it (e.g. tools,
belt buckles).
☞ Unpack the device and all
accompanying parts carefully.
☞ Check the device and its constituent
parts for damage.
☞ Check the scope of delivery is
complete.
D "2.2 Technical data" (page 79).
If parts are missing or damaged:
☞ Please consult your dealer or
customer services.
☞ Remove the packaging material and
the protective film.
D "8.1 Dispose of packaging"
(page 90).
81