Operation; Inserting/Replacing The Batteries; Switching On And Off - Parkside PKLL 7 A1 Mode D'emploi

Operation

GB
IE

Inserting/replacing the batteries

♦ Open the battery compartment
♦
Insert the batteries. Ensure correct polarity as shown on the
diagram inside the battery compartment.
♦
Close the battery compartment
NOTE
► With a low battery level, the LED
Always replace all batteries together. Only use batteries
from one manufacturer and with the same capacity.
► If you do not intend to use the appliance for a long time,
remove the batteries. During extended periods of storage,
the batteries can corrode and discharge themselves.
Switching on and off
♦ To turn on the appliance, move the ON/OFF switch
two laser lines from the laser aperture
♦ To turn on the appliance, move the ON/OFF switch
is switched off.
8
position. Immediately after switching on, the appliance emits
position. The pendulum unit is locked when the appliance
.
.
flashes red.
.
into the
into the
PKLL 7 A1