Entering Your Area Code - Sony CALLER ID SPP-ID400 Mode D'emploi

Step 4

Entering your area code

When you use this phone for the first time, or move to an area that has
a different area code, you must enter your area code.
This is necessary because the phone must distinguish local or long
distance calls to properly dial calls from the Caller ID list.
Notes
• If an area code is already entered, it appears on the display in step 3. To enter
a different area code, see "To change the area code" on the next page.
• Do not allow more than 20 seconds to elapse between each step of the procedure.
Tip
To check the current area code, do steps 1 to 3 above. The area code appears on
the display for 20 seconds.
1
Press and hold
(PGM/SPEED DIAL) for more
than two seconds.
2
Press $ to make "AREA" flash.
SPEED DIAL AREA
RINGER
3
Press (ENTER).
"ENTER AREA CODE" appears
on the display.
4
Enter three digits of your area
code using the dialing keys.
5
Press (ENTER).
You hear a long confirmation
beep.
continued
EN
11
Getting Started