Safety information
Do not store explosive
substances such as aerosol
containers with flammable
propellant gas in this appliance.
Do not submerge the
appliance in water or any
other liquid. Protect the power
cable, plug, and mains adaptor from
moisture.
Do not put your hand into
the appliance during
operation – this may lead to injury!
Make sure that the appliance is
never tilted more than 45°, as this
could damage the compressor.
After unpacking, leave the
appliance in its final po
sition for at least 2 hours. The
cooling agent inside the appliance
must first sink to the bottom, as
the compressor could otherwise be
damaged. The manufacturer will
assume no liability in the event of
incorrect assembly, improper or
incorrect use, or repairs carried out
by unauthorised third parties.
Warning: Risk of fire! The
cooling circuit contains the
cooling agent isobutane (R600a).
Although it is a natural, environ
mentallyfriendly gas, it is also
flammable. Make sure that the
cooling circuit is not damaged
during transport or while setting up
the appliance.
The cooling agent (R600a) is
flammable.
• If the cooling circuit is damaged:
• Keep away from open flames
and ignition sources.
• Thoroughly ventilate the
room in which the appliance is
located.
• Do not continue using the
appliance.
• If the supply cord is damaged, it
must be replaced by the manu
facturer, its service agent or
similarly qualified persons in
order to avoid a hazard.
• After unpacking the appliance,
check that it is in perfect con
dition and has not sustained any
damage that could impair its
functional safety. Should you
notice any defects or if the
17