Safety Function; Setting Up And Connecting - WMF KULT X Mode D'emploi

▪ Do not reach into the appliance when it is in operation.
▪ Also keep long hair, for example, away from the insertion opening.
▪ Do not insert objects such as spoons, for example, into the insertion opening when the appliance is
in operation.
▪ Do not move the appliance during operation.
▪ The blades will continue to rotate after the appliance has been switched off. Wait until they stop
moving before handling the appliance.
▪ Never touch the blades of the cutting inserts.
Risk of damage!
Improper handling of the appliance may lead to damage.
▪ Do not add any boiling hot liquids.
▪ Do not fill with any hard foods such as coffee beans, candied sugar, bones, nut shells, etc., or any
frozen food.
▪ Do not place the appliance on surfaces which are sensitive to water. Water sprays can damage
such surfaces.

Safety function

The food processor has a built-in safety function. The appliance only works if it is completely and
correctly assembled.

Setting up and connecting

▪ Remove all packaging from the appliance.
▪ Clean the appliance (see the chapter entitled "Cleaning and maintenance").
▪ Set up the appliance on a stable and level surface near to a plug socket.
▪ Ensure that the operating switch (6) is set to O (off).
▪ Plug the mains plug into an earthed wall socket that has been installed pursuant to regulations.
▪ If the power cord is too long, you can roll it up inside the base of the motor (5).
14