Meister MAS36VL Traduction Du Manuel D'utilisation Original page 62

5450020-Akku-Schra_man 23.02.18 14:12 Seite 62
d Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
e Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of these devices can reduce dust related hazards.
h During operation, this power tool generates an electro magnetic field.
This field may, under certain circumstances, influence active or
passive medical implants. In order to reduce the risk of serious or deadly
injuries, we recommend persons with such a medical implant to consult
their doctor and the manufacturer of the medical implant before using the
power tool.
4 Power tool use and care
a Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c Disconnect the plug from the power source and/or remove the battery,
before making any adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
62