Wireless Subwoofer - Philips Fidelio E6 Mode D'emploi

Blinks red when the battery capacity is
•
less than 10% remaining.
• Lights up orange when the surround
speaker is being charged (only for the
surround speakers docked onto the
main unit).
b
• Press to turn on the surround speaker
if it automatically goes to standby.
• Press and hold to switch the surround
speaker to standby.
button/LED
c
• Press to switch the surround speaker
to Bluetooth mode.
• The LED blinks when you switch the
surround speaker to Bluetooth and no
Bluetooth devices are connected.
• The LED lights up when you switch
the surround speaker to Bluetooth and
Bluetooth devices are connected.
d SOD button/LED
• Press to switch the surround speaker
to SOD (surround on demand) mode.
• The LED lights up white when the
surround speaker is switched to SOD
mode.
e
In case of no response from the surround
speaker, press and hold with a pin for
5 seconds to reset the surround speaker
to the default settings.
Note
•
If you press the button on the surround speaker, the
surround speaker disconnects the main unit (or SOD
mode switches off).

Wireless subwoofer

This product comes with a wireless subwoofer.
a Subwoofer indicator
• Blinks when the subwoofer is not
connected, or being connected, to the
main unit.
• Lights up when the subwoofer is
connected to the main unit.
• Lights off when the subwoofer goes
to standby, or wireless connection is
disconnected for 4 minutes.
(connect)
b
Press to enter the pairing mode for
connection with the main unit.
~
c
Connect to the power supply.
a
b
c
EN
7