Update Software Via Usb - Philips Fidelio E6 Mode D'emploi

5
Select the name of this product, then select
"Software Update" > "Network".
6
Follow the on-screen instructions to
complete the update.
» During upgrade, "UPG XX" (upgrade)
is displayed on the display panel,
and "XX" indicates a percentage of
upgrade completion.
» If the update is complete, this product
automatically turns off and on again.
» If the update fails, "ERROR"(error) is
displayed on the display panel, then this
product automatically turns off and on
again, and prompts you to re-trigger
the upgrade.

Update software via USB

Caution
•
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this product.
What you need
• A USB storage device that is formatted
with FAT16, FAT32 or NTFS.
1
Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a Unzip the downloaded file, and make
sure that the unzipped folder is
named "UPG".
b Put the "UPG" folder in the root
directory.
3
Connect the USB storage device to
the (USB) connector on this product.
EN
24
4
Launch Philips "HCWeSet" app on your
mobile device.
• Make sure that you connect this
product to the network.
5
Go to the App home page.
6
Tap to access the menu options.
7
Select "My Speakers".
» The connected devices are listed.
8
Select the name of this product, then select
"Software Update" > "USB".
9
Follow the on-screen instructions to
complete the update.
» During upgrade, "UPG XX" (upgrade)
is displayed on the display panel,
and "XX" indicates a percentage of
upgrade completion.
» If the update is complete, this product
automatically turns off and on again.
» If the update fails, "ERROR"(error) is
displayed on the display panel, then this
product automatically turns off and on
again, and prompts you to re-trigger
the upgrade.