SwissPhone Analog Pager Mode D'emploi page 29

Table des Matières

Publicité

Hint: The profiles/channels are usually located in the first position of the secondary menu to
access them easily. To change the profile/channel in that instance, access the secondary menu
by holding the SELECT (1) button for approximately two seconds. Next, press the OK (2)
button to switch to the desired profile and confirm the selection by pressing SELECT (1).
Clock-Cycle through the menu using the SELECT (1) button until the clock icon begins
to blink. Next, confirm the selection by pressing OK (2). Press SELECT (1) until the cor-
rect hour is reached, then press OK (2) to adjust the minutes. Press SELECT (1) until
the correct minute value is selected and then press OK (2) to save the time.
The envelope icon allows users to replay previously deleted messages.
31

Publicité

Table des Matières
loading

Produits Connexes pour SwissPhone Analog Pager

Table des Matières