AKO 5011 Guide Rapide page 6

Option B, configuration without keyboard, mouse and monitor
-Connect the AKO-5011 web server to the Ethernet
network (see page 2) and turn it on.
-To be able to make the first connection with the
AKO-5011 server, a network PC should be configured
to the same IP range of the server (by default
10.0.50.101); it is recommended to configure the PC
with IP 10.0.50.102.
-Start the "Conexión a escritorio remoto"
(connection to remote desktop) program and
enter the server IP (10.0.50.101).
-On the following screen,
enter the data:
Username: root
Password: akows
-The remote window of the server will be displayed
after a few minutes. To change the network configu-
ration, click the RED (network) icon on the top right-
hand part of the screen and choose the "Edit
connections" option.
-In the "wired" tab, choose the AKONET WIRED option
and click "Edit".
-Select the IPv4 tag. Configure the data according to
your network's needs and click "Save".
Conexión a
Escritorio
remoto
-Reboot the server and return the PC to the initial IP
configuration.
-To access the server from any computer, open the
navigator and enter the IP address chosen previously
(1). The welcome screen will be displayed.
-Enter the access data, which by default are:
User: superuser
Password: superuser
6
1