Initial Configuration - AKO 5011 Guide Rapide

Initial configuration

Option A, configuration with keyboard, mouse and monitor
-Connect a keyboard, mouse and monitor to the
AKO-5011 web server (see page 2) and turn it on.
The home page is displayed.
-Close the navigator, right click the mouse and choose
the "Exit" option and click "Exit" again.
-The access data are then requested, enter the follow-
ing data:
User: root
Password: akows
-On the top right-hand part of the screen, click on the
RED (network) icon and select the "Edit connections"
option.
-In the "wired" tab, choose the AKONET WIRED option
and click "Edit".
-Select the IPv4 tag. Configure the data according to
your network's needs and click "Save".
-Connect the server to the Ethernet network and
reboot.
-To access the server from any computer, open the
navigator and enter the IP address chosen previously
(1). The welcome screen will be displayed.
-Enter the access data, which by default are:
User: superuser
Password: superuser
7
1