RIKTA ESMIL Mode D'emploi page 39

RIKTA – ESMIL (2A)
® ®
The color of TENS indicator depends on the contact with the patient's skin:
Green
Blue
Green/Blue
During the device transfer from one zone to another before the end of pro-
cedure, the voltage level on the electrodes is maintained at the set value.
After the time of procedure expires (or, if the procedure was interrupted by
pressing the button
When you restart the treatment procedure, the TENS intensity should be
set again.
Contact with patient's skin is good.
Contact with patient's skin is good.
The so called "saturation" of the patient's skin occurs
under the electrodes (a beep sounds at the moment
of "saturation").
If there are no specific instructions from the physi-
cian, continue the treatment.
No contact with the patient's skin.
), the impact of the TENS stop.
39
EN