INSTALLATION
A. Camera Unit
Permanent installation using pedestal stand.
2. Attach the Camera onto the Pedestal and tighten
1. Attach the Pedestal using 4 screws.
the thumb screw.
CAUTION : Keep camera installed away from direct sunlight. Also avoid places where humidity is high or where
the camera is not protected from rain.The mounting bracket must be attached to a structural object such
as a wall stud or ceiling rafter using suitable fastener. Do not touch the glass of the lens. This could
damage the delicate coating on its surface. If the lens has to be cleaned, use a special lens cleaning
tissue available at any good camera store.
12
MARMITEK