InnoCigs CUBOID TAP Manuel D'utilisation page 68

INNOCIGS CUBOID TAP – OPERATING & CHANGING THE VAPING MODES
Setting the TCR Mode (M1, M2, M3)
Press the Fire button and the "Up" button simultaneously while the device is switched off to enter the TCR menu:
1. Press the "Up" or "Down" button to switch between TCR M1, M2, and M3.
2. Press the Fire button to confirm the selected mode.
3. Press the "Up" or "Down" setting buttons to change the values corresponding to the coil of the atomizer
head used.
4. Press and hold the fire button or wait about 10 seconds to confirm the settings.
TCR Value Ranges for different Coils
Material
Nickel
NiFe
Titanium
SS (303, 304, 316, 317)
66
TCR Value Range
600-700
300-400
300-400
80-200
Note:
1. The TCR values listed in the table are
the actual TCR value multiplied by 10
2. The TCR value range is 1 to 1000.
.
5