InnoCigs CUBOID TAP Manuel D'utilisation page 59

INNOCIGS CUBOID TAP – USING THE DEVICE
Charging & Upgrading
The balanced charging system allows fast charging with a maximum charging current of up to 2 A. You can charge
the device via USB cable via a PC or with an external device into which you insert the batteries.
Also connect the device for a software update via QC-USB charging cable with an internet-compatible PC.
Fast Operation via the TAPTEC Sensors
TM
By slowly holding and pressing the sensors in the lower side of the device (do not press the Fire button), you can
access different menu items and change your settings.
With device switched on:
Three times = Lock/unlock the Fire button 2 and/or the "Up" and "Down" settings buttons
Four times = Activate the menu's display protection (screen), logo and preheat
Five times = Display on/off
With device switched off:
Three times = Set TCR value
Four times = Turn display 180 °C
Five times = Display battery voltage
57