Ozone - GRE SPA 4000 Manuel De Fonctionnement

UTILIZATION MANUAL
particularly in hard water. This product should be
added weekly and whenever the water is renewed.
• SPA-ALGAECIDE: This algaecide prevents algae
from growing in the water of the Spa.
This product should be added weekly and
whenever the water is renewed.
• SPA-ANTIFOAM: Foam is often formed due to
the agitation of water and the grease present in
the water. Whenever there is a significant amount
of foam, remove it with antifoam-Spa.
• SPA-DEGREASER: To remove rings of dirt and
grease from the walls of the Spa. Before using this
product it is advisable to empty the Spa and apply
the degreaser with a sponge on the parts to be
cleaned. Rinse immediately with abundant water.

7.6. OZONE

Ozone, O , is an oxidant chemical compound, which
3
proves very effective for disinfecting water. The
principal advantage of ozone is that it leaves no
chemical trace and is odorless.
Ozone's capacity as a disinfectant is due to its
potential as an oxidant, which eliminates any organic
matter that may be present in the water.
In order to produce ozone electricity is passed through
an ozonator to produce ozone ions from oxygen in the
atmosphere. This is an automatic process and the
resulting product is injected through the Spa's jets.
The process does not require the user to use any
other mechanism to generate it.
The water is collected in the swallow holes and the
skimmer, by the absorption action of the massage
pump:
Then it is sent through the heat exchanger and as it
leaves the ozone is injected into the water flow. Water
is distributed through all jets depending in the position
of the water flow valve. (See 5.5) Also, part of the
water flow is distributed through the drain
outlet in order to avoid water collecting in this
area.
12
EN